Our company has become the director unit of China Friction Seal Industry Association

The meeting agreed to add Peng Peng, general manager of Nantong Wanda friction materials Co., Ltd. and Zhao Xin, general manager of Cangzhou Xinlida Hardware Manufacturing Co., Ltd. as directors of the 6th Council.

Many people change the brake discs to ceramic ones? Why is this?

Cars have gradually stepped into our lives. People usually have too much pressure in their daily life. They usually choose to travel on holidays or holidays. Although China's traffic development has gradually stepped into the forefront in the world, there are still many inconveniences, so many people will choose to buy their own cars, so that the development of the automobile industry is growing. Today, Xiaobian will continue to take you to know something about cars. About 60 brake pads of the car were replaced because of the abnormal noise of the brake pads.

What are the requirements for the selection of friction materials for elevator friction lining?

Because of its fast speed and frequent use, the friction lining of the passenger elevator has high requirements on the selection of friction materials, mainly graphite and resin, as well as formulated materials, such as nano calcium carbonate JTC, ceramic powder instead of resin, new material carbon carbon fiber EKC instead of asbestos fiber, inorganic whiskers, silicon dioxide, oil resistant materials, high wear resistant metal powder and other raw materials.

Why the friction plate sticks

After the friction plates are kept stationary for a long time, they will stick together. At this time, you don't have to worry, because the friction materials in the friction plates are polymer, which contains rubber components. Especially in hot weather, the phenomenon of stickiness will occur, but it will not affect normal use.

Principle of formula design of friction plate

The friction plate achieves various properties of the product through the ratio of various friction materials by the R&D personnel. In the ratio, the R&D personnel will use the comprehensive ratio of various materials instead of adding them in large proportion for a certain performance, which will make the friction plate produced cannot be used normally. The proportion of friction materials is required by certain requirements, and we will talk about the principles below.

The Common Manufacturing Method of Friction Plate Hot Pressing

In the production process of friction plates, the most commonly used molding method is to mold and solidify the pressed plastic under pressure and heating conditions to obtain friction plates with specified shape, density, hardness and mechanical strength. There are also few products formed under lower pressure and temperature.